Structure and usage: this series
pump absorbs in one
direction and is multisteps subsection centrifuge pump.
It is used to transport the water and non corrosive
liquid. If you change the material of the pump it also can transport the
corrosive
liquid too. It is used for
mine water supply, factory water supply and the other
water supplies between city
and suburb.Machining range:
stroke :13-333m
runoff: 13m3-1800m3/h
power :2.2-220KW |
Structure and usage：With the inlet mechanical
airproof,it is used to
enhance the firefighting pressure,pipe net pressure,
and heat and cold water supply.Machining
range: stroke: 8m~125m
runoff:1.5m3/h~1600m3/h
power:0.55KW~280KW
|
Structure and usage：With the
inlet mechanical
airproof, it is used to enhance the firefighti
ng pressure, pipe net pressure, and heat and cold water supply.
Machining range: stroke:5m-6m
runoff:18m3/h- 375m3/h
power:1.5KW-250KW
diametrer of the exit:50mm-60mm
|
Structure and Usage: This series of pump is
vertical, absorb in one
direction, multi-steps subsection centrifuge
pump. DL type can be used to transport the water and non corrosive
liquid above 80℃. DLR
type is used to transport the medium
below 150℃.It is the important equipment of building and district
firefighting water supply and centralized
hot water supply system.
Machining range: stroke:21m-296m
runoff:4.9m3-360m3/h
power:1.5-315KW |
Structure and Usage： This series of pump is
absorbing
in both directions, single step horizontal
middle-open centrifuge pump. It can be used to transport
the water and non corrosive liquid. It also can transport
the medium below 80℃.After the bearing is cold by water,
the pump can transport the hot
water below 130℃. If you can change the ring, sleeve and
impellor, it can transport the water with clay and grain.
Machining range:
stroke:10m-140m
runoff:120m3/h-6000m3/h
power:15KW-700KW
|
Structure and usage: This series
of pump can
be divided into three kinds .They are IS cool water pump, ISR hot water
pump and ISY oil type .
They are all absorb in
one direction and is single step cantilever
centrifuge pump. It is used to transportthe water
and non corrosive liquid. Theyare airproofed by soft
filling, mechanical and framework. According
to the customer, we can make the pump with copper
impellor and stainless pump.They are widely used
in enterprise, city water supply, city hot water
supply and agriculture irrigation.
Machining range: stroke: 2m-333 m
runoff: 2m3-1920m3/h
power:0.55-110KW |
